How much does it cost to narrate a 5,000-word article with an AI voice?
At list price, one clean take of a 5,000-word article costs about $0.11 on Google's Standard voices, $0.86 on Chirp 3: HD or Polly Generative, $2.28 on the ElevenLabs v3 API, $2.85 on Polly Long-Form and $4.56 on Google Studio. A re-take is billed in full. A local app charges nothing per take.
Those figures rest on two conversions that most pricing pages leave to you: words into billed characters, and characters into dollars. Both are simple once the numbers are on the table, and both are below, so you can redo them for your own piece. If you want to narrate a 5,000-word article once, the bill is small almost anywhere. If you want to narrate one every week, with a second pass on the paragraphs that come out flat, the choice of service starts to matter.
5,000 words in characters: about 28,500, spaces included
Cloud services bill characters, and they count spaces and punctuation. Measured on real prose, English runs 5.5 to 5.8 characters a word with spaces, so 5,000 words is about 28,500 billed characters. Leave the spaces out and it drops to around 23,000, which is why word-based estimates come out low.
Google states the rule outright: every character in the request is billed, spaces and newlines
included, plus every SSML tag except <mark>. So the count that matters is the one with spaces.
We measured it rather than guess. Across the six guides on this site, 16,833 words of prose came to 95,242 characters with spaces and punctuation: 5.66 a word, between 5.57 and 5.83 per guide. Three public-domain novels from Project Gutenberg came out at 5.12 to 5.64. With the whitespace stripped, the same novels fall to 4.1 to 4.6 a word. That is also close to the 4.7 you get from DAISY's figure of 423,000 characters for a 90,000-word novel, which does not say whether spaces were counted.
We use 5.7 characters a word in every calculation here. Plain, short-worded writing will come in a little under that; technical writing with long terms a little over. A precise count for your own text is one paste into any character counter. What gets counted service by service is covered in our explainer on what per character billing actually means.
How long is 5,000 words read aloud?
About half an hour. ACX, the audiobook production marketplace, says most narrators read 9,300 words per finished hour, which puts 5,000 words at about 32 minutes. ElevenLabs maps 1,000 characters to about a minute of audio, so its own estimate for 28,500 characters is 28 or 29 minutes.
Pages that answer this question for human readers give a wider spread, from about 27 minutes at 183 words a minute to about 38 at a presentation pace of 130. A synthetic voice has its own pace, and the voice, the model and the pauses all move it. The length matters for one reason here: some plans sell minutes rather than characters, and some newer models bill the audio that comes out rather than the text that goes in.
One article, priced on every service
Multiply 28,500 characters by each list price. One take runs from 11 cents on a Standard voice to $4.56 on Google Studio, and about $5 on ElevenLabs' Creator plan, whether you count it as a share of the plan or as extra minutes. Free monthly allowances can bring the developer APIs to zero at low volume.

| Service and voice | List price | One take | Two takes | Free allowance |
|---|---|---|---|---|
| Google Standard | $4 per 1M characters | $0.11 | $0.23 | 4M characters a month |
| Google Neural2 | $16 per 1M | $0.46 | $0.91 | 1M a month |
| Google Chirp 3: HD | $30 per 1M | $0.86 | $1.71 | 1M a month |
| Amazon Polly Generative | $30 per 1M | $0.86 | $1.71 | 100,000 a month, first 12 months |
| ElevenLabs API, Flash or Turbo | $0.04 per 1,000 | $1.14 | $2.28 | Plan allowance |
| ElevenLabs API, v3 or v2 | $0.08 per 1,000 | $2.28 | $4.56 | Plan allowance |
| Amazon Polly Long-Form | $100 per 1M | $2.85 | $5.70 | 500,000 a month, first 12 months |
| Google Studio | $160 per 1M | $4.56 | $9.12 | 1M a month |
| ElevenLabs Creator, extra minutes | about $0.18 a minute | about $5.13 | about $10.26 | 121,000 credits in the $22 plan |
| txt2mp3 | One payment, $29 today | $0 | $0 | Unlimited |
On ElevenLabs' Creator plan, one article uses 28,500 of the month's 121,000 credits, about a quarter of the $22. The $6 Starter plan holds 30,000 credits, so it covers one article a month with almost nothing left for a second take. For the same arithmetic per finished hour rather than per article, see our pillar guide on text-to-speech cost per character.
The ElevenLabs web app caps a generation at 5,000 characters
A 5,000-word article does not go through in one piece. ElevenLabs' web app takes up to 5,000 characters per generation on paid plans and 2,500 on the free plan, so the article is at least six generations; its API's Multilingual v2 model takes 10,000. ElevenLabs points long work to its Studio editor instead. txt2mp3 takes up to 20,000 characters at a time, so the same article goes in as two halves.
A second take doubles the bill
Every regeneration is a new request, billed at the full rate. Render each section twice and the article costs twice its list price, as the table's fourth column shows. The DAISY Consortium, pricing synthetic narration for accessible books, found corrections could push a title to two or three times the price of a single conversion.
Long articles are where re-takes pile up. Product names come out wrong, a list reads as one breathless sentence, a paragraph you were happy with on the page sounds stiff aloud. Each fix is a new request, and the meter cannot tell it from new text. Re-takes are the largest of the hidden costs of cloud TTS, but not the only one. The per-character rate sets the floor; the number of takes decides the bill. Why holding back on re-takes to save characters tends to cost more in the end is the subject of why rationing characters is costing you more than the subscription.
ElevenLabs cost per article against Google
Per character, Google is cheaper. Chirp 3: HD costs $0.86 an article against $2.28 on ElevenLabs' v3 API, and Google's first million Chirp 3: HD characters each month are free, about 35 articles. The difference is what you buy: ElevenLabs sells a creator app with an editor and voice cloning, Google sells an API you call from code.
That last point decides it for most writers. Google's free tier only helps if you can send requests to an API and stitch the returned audio together. ElevenLabs' plans are built for people who would rather paste text into a page, and the plan price is what that convenience costs.
Google's newer Gemini voices are billed a third way, by the audio that comes out: 25 tokens per second of speech. On Gemini 2.5 Pro TTS at $20 per million audio tokens, a 32-minute article comes to about $0.97, plus a small charge for the text going in. A slower voice costs more there for the same words.
An audio version of every blog post, for a year
Four 5,000-word posts a month is about 114,000 characters. On ElevenLabs Creator that fits the $22 plan with one take, $264 a year. A second take pushes it to about $41 a month in extra minutes. On Google Chirp 3: HD both fit the free tier. On txt2mp3 the year costs the one-time price.
| Four posts a month | One take, per year | Two takes, per year |
|---|---|---|
| Google Chirp 3: HD | $0, inside the free 1M | $0, inside the free 1M |
| Amazon Polly Generative | $41.04 after year one | $82.08 after year one |
| ElevenLabs API, v3 | $109.44 | $218.88 |
| ElevenLabs Creator, $22 a month | $264 | about $495 with extra minutes |
| txt2mp3 | $29 once | $29 once |
The Creator figure for two takes assumes you stay on the plan and buy the 107,000 credits over the allowance as extra minutes at about $0.18. The alternative is the $99 Pro plan, which holds 600,000 credits and costs $1,188 a year. txt2mp3's $29 is the launch price for the first 20 copies; it rises to $69 and then to a standing $99, still paid once. When that purchase pays for itself against your own plan is worked through in when a local TTS app beats paying monthly.
Work out the cost for your own article
Three numbers do it. Multiply your word count by 5.7 to get characters. Multiply the characters by the per-character rate to get one take. Multiply one take by the number of takes you usually need. Then check the result against your plan's monthly allowance before assuming the extra is free.
Count characters, not words
Paste the text you will actually send into a character counter, spaces included, or multiply the word count by 5.7. Leave out what the listener should not hear, like link URLs and image credits.
Apply the rate
Divide the list price by its unit. $30 per million is $0.00003 a character; $0.08 per 1,000 is $0.00008. Multiply by your character count.
Multiply by your takes
Count honestly. Most long pieces need a second pass on some sections, and an edited script means re-rendering the edited parts.
Compare with the allowance
On a plan, divide the month's credits by your characters per article to see how many articles fit before extra minutes start.
If you would rather not do it by hand, our AI voiceover cost calculator runs the same numbers.
Where a cloud service is still the cheaper choice
If you narrate one or two long articles a month and can call an API, Google's free million Chirp 3: HD characters covers it, and no purchase beats free. Cloud also wins on Windows, on phones and across many languages. txt2mp3 is a Mac app for Apple silicon and needs a one-time model download of a little over 5 GB.
The same goes for occasional use on a creator plan. If one article a month is the whole job, ElevenLabs' $6 Starter plan is cheaper than any purchase for the first few months. The local app earns its price on volume and on re-takes: the second take of every section costs nothing, which changes how freely you fix the parts that sound wrong. How it compares feature by feature is in ElevenLabs vs txt2mp3, and the step-by-step for the job itself is in how to convert an article to MP3 on a Mac.
Frequently asked questions
How many TTS characters does a 5,000-word article use, spaces included?
About 28,500. We measured 5.66 characters a word, spaces and punctuation included, across 16,833 words of our own guides, and 5.12 to 5.64 on three public-domain novels, so we work with 5.7. Google bills spaces, newlines and most SSML tags, so the figure with spaces is the one to budget. Without spaces the same article is closer to 23,000 characters.
What does an audio version of every weekly blog post cost in a year?
Fifty-two 5,000-word posts is about 1,482,000 characters. One take costs $118.56 a year on the ElevenLabs v3 API and $44.46 on Amazon Polly Generative after its first-year free tier. On ElevenLabs Creator it is $264 a year plus a few dollars of extra minutes in months with five posts. On Google Chirp 3: HD no month passes the free million, so it costs nothing. Re-takes multiply every figure except Google's free tier and txt2mp3's one-time price.
Does a 5,000-word article fit in one generation?
Not on most services. ElevenLabs' web app takes 5,000 characters per generation on paid plans, so about 28,500 characters means at least six. Its Multilingual v2 API model takes 10,000, and its Flash and Turbo v2.5 models 40,000. txt2mp3 takes 20,000 at a time, so the article goes in as two halves.
Do headings, links and image captions count as characters?
Only if you send them, and then yes. The meter counts the text in the request, so a heading you paste is billed and a link URL you paste is billed and read aloud. Strip URLs, image credits and anything else the listener should not hear before you generate. It saves characters and sounds better.
Is it cheaper to narrate only a summary of each article?
In direct proportion. A 1,000-word summary is about 5,700 characters, a fifth of the full article, and costs a fifth as much on any per-character service. Whether a summary serves your listeners is a different question; people who subscribe to an audio version usually want the article itself.
Can I narrate a whole article with the txt2mp3 trial?
No. The trial speaks up to 120 characters at a time, about one sentence, which is enough to judge the voice on your own text before paying. After the one-time purchase it takes up to 20,000 characters per generation, as often as you like.
Where the numbers came from
Google Cloud Text-to-Speech pricing
cloud.google.com/text-to-speech/pricingStandard and WaveNet voices at US$4 per 1 million characters with 4 million free a month; Neural2 at US$16, Chirp 3: HD at US$30 and Studio at US$160, each with 1 million free a month; the rule that spaces, newlines and every SSML tag except
<mark>are billed; Gemini-TTS billed in audio tokens at 25 per second, with Gemini 2.5 Pro TTS output at $20 per 1 million audio tokens. Fetched 20 October 2026.Amazon Polly pricing
aws.amazon.com/polly/pricingStandard at $4.00, Neural at $16.00, Generative at $30 and Long-Form at $100.00 per 1 million characters; free tiers of 100 thousand Generative and 500 thousand Long-Form characters a month for the first 12 months. Fetched 20 October 2026.
ElevenLabs API pricing
elevenlabs.io/pricing/api$0.08 per 1,000 characters for v4, v3 and v2 Multilingual and $0.04 for Flash and Turbo, each shown as about the same amount per minute; plan prices of $6 Starter and $22 Creator. The Creator plan's 50% first-month discount was running; we used the regular price. Fetched 20 October 2026.
ElevenLabs pricing
elevenlabs.io/pricingStarter at $6 with 30,000 credits, Creator at $22 with 121,000 credits (about 121 minutes) and about $0.18 per extra minute, Pro at $99 with 600,000 credits; one text character equals one credit on Multilingual v2. Fetched 20 October 2026.
ElevenLabs: What's the maximum amount of characters and text I can generate?
elevenlabs.io/docs/help-center/product/core-capabilities/text-to-speech/whats-the-maximum-amount-of-characters-and-text-i-can-generate5,000 characters per generation on paid plans and 2,500 on free plans in the web app; 10,000 for Multilingual v2 and 40,000 for Flash and Turbo v2.5 over the API. Fetched 20 October 2026.
ACX: How long will my narrated audiobook be?
help.acx.com/s/article/how-long-will-my-narrated-audiobook-beMost performers narrate about 9,300 words per hour. Fetched 20 October 2026.
How Many Words: How long does it take to read 5,000 words?
howmanywords.app/blog/how-long-does-it-take-to-read-5000-wordsAbout 27 minutes to read 5,000 words aloud at 183 words a minute. Fetched 20 October 2026.
Word Counter Tool: reading time for 5,000 words
www.wordcountertool.net/reading-time/for/5000-wordsA speaking pace of 130 words a minute for presentations, which puts 5,000 words at about 38 minutes. Fetched 20 October 2026.
DAISY Consortium: AI Text To Speech Cost Comparison
daisy.org/news-events/articles/ai-text-to-speech-cost-comparisonA typical novel of 90,000 words or 423,000 characters, and that titles needing multiple corrections could cost two or three times a single conversion. Fetched 20 October 2026.
txt2mp3, first-hand
Characters per word measured on 20 October 2026 over the prose of the six guides published on this site and over Project Gutenberg's A Christmas Carol, Pride and Prejudice and Adventures of Huckleberry Finn. The 20,000-character limit per generation, the 120-character trial, the one-time model download of a little over 5 GB and the $29, $69 and $99 price ladder are the app's own. Derived, not quoted: every per-article and per-year cost (characters times list price) and the 32-minute length (5,000 words at ACX's 9,300 an hour). The four-posts-a-month schedule and the two-takes habit are stated assumptions.
